Bike Trailer Parts

These parts can be used to repair one of our bike trailers or to build a bicycle trailer of your own design.

bike trailer hitch on frame

Bicycle Trailer Hitch - Our heavy-duty trailer hitch can pull loads of 500 lbs. Fits most bikes, including those with disc brakes. More >>

$ 50.00

Qty:

Availability:
usually ships in 1-2 days

trailer hitch band clamp

Trailer Hitch Band Clamp - Replacement thumbscrew-type stainless steel band clamp (size #16) for use with our bicycle trailer hitch.

$ 1.50

Qty:

Availability:
usually ships in 1-2 days

hitch pin

Bicycle Trailer Hitch Pin - Quick-connect 3/8" diameter pin to connect the trailer towbar to the hitch.

$ 4.00

Qty:

Availability:
usually ships in 1-2 days

channel-frame trailer towbar

Channel-Frame Trailer Towbar - The towbar used on our A- and AW-series trailers. Large (2.375"/6cm) diameter aluminum tubing. Includes mounting clamps and hardware for mounting to a 1" x 2" (25mm x 50mm) rectangular front crossmember.

$ 75.00

Qty:

Availability:
usually ships in 1-2 days

shock cord 32inch triple-strength

Triple-strength 32" Shock Cord - High-strength hooks won't bend. Great for tying down loads on your trailer.

$ 3.50

Qty:

Availability:
usually ships in 1-2 days

16x175 street tire

16" x 1.75" Tire - Street tread. Our standard trailer tire. Use with tube listed below

$ 9.00

Qty:

Availability:
usually ships in 1-2 days

16x175 street tire

16" x 1.95" High-Pressure Tire - Street tread. A high-pressure tire for those who prefer slightly less rolling resistance, although we frankly can't tell a difference between these tires and those listed above in actual use. Please note: We recommend you do not inflate these tires beyond about 70 psi on our trailers, as the wheel manufacturer does not rate the wheels for high-pressure use.

$ 30.00

Qty:

Availability:
usually ships in 1-2 days

inner tube 16x1.75

16" x 1.75" Tube - Bicycle inner tube with Schrader valve. Fits our standard trailer tire and wheel.

$ 3.00

Qty:

Availability:
usually ships in 1-2 days

16 inch wheel

16" x 1.75" Nylon-Composite Wheel - Extremely tough 5-spoke wheels. Includes precision cartridge ball bearings. Mounts on 5/8" or 16 mm axles. Hub width is 2.5" (6.4 cm). Tire and tube not included.

$ 40.00

Qty:

Availability:
usually ships in 1-2 days

axle

Galvanized steel axle - Thick-walled 1" diameter tube with 5/8" pins welded on the ends. Distance between the hubs: 22.5" (57 cm). Overall length: 28.75" (73 cm). Fits our channel-frame trailers. Includes 2 wheel retaining pins and spacers.

$ 45.00

Qty:

Availability:
usually ships in 1-2 days

wheel_retainer_pin_and_spacer.jpg (54676)

Wheel retainer pin and spacer - keeps wheel on our 5/8" axle. Unique pin design locks around the axle to prevent it from falling out.

$ 1.50

Qty:

Availability:
usually ships in 1-2 days

m16x35mm-bearing-200x150.jpg (5kb)

5/8" x 35 mm Precision Cartridge Bearing - For use in the above wheel. Standard bearing used on our trailers since about 1999. Does NOT have a snap ring.

$ 4.00

Qty:

Availability:
usually ships in 1-2 days

625x1375-bearing-200x150.jpg (5kb)

5/8" x 1-3/8" Precision Cartridge Bearing - Standard bearing we used on our trailers prior to about 1999. Has a snap ring around its perimeter.

$ 3.00

Qty:

Availability:
usually ships in 1-2 days

self-adhesive oblong rear reflector

Red Rear Reflector - Very durable. Self-adhesive design allows mounting with or without screws. Oblong shape, 4-3/8" W x 1-7/8" H (111.1mm x 47.6mm).

$ 2.00

Qty:

Availability:
usually ships in 1-2 days

fender crossmember

Fender Crossmember - fits A series trailers.

$ 15.00

Qty:

Availability:
usually ships in 1-2 days